Artlantis Links - 3DAllusions

TheAllusionist · #1 (**permalink**) 10-25-2006, 01:34 AM

Artlantis is modeling rendering program praised for it's ease of use. Please feel free to post useful links for users.

Artlantis - Mothership:
http://www.artlantis.com/

Artlantis Forums - Official Forums:
http://www.artlantis.com/support/forum/

Sjaak Boer · #2 (**permalink**) 10-25-2006, 06:52 AM

Thanks for opening an ArtLantis section at 3Dallusions.

I am an ArtLantisuser since version 3,5 and know what can be done with it. Anybody with questions can ask them here. Some people allready know me from the ArtLantisforum. You can find me overthere as well answering questions.

Sjaak

TheAllusionist · #3 (**permalink**) 10-25-2006, 02:49 PM

Thanks Sjaak for offering your knowledge and expertise

kmr · #4 (**permalink**) 10-25-2006, 06:09 PM

THX Sjaak to always give us some tricks

It's nice too see a new section here dedicate to this really cool soft, that's really cool to see an new enthousiasm under Artlantis since the R release.

Sjaak Boer · #5 (**permalink**) 10-26-2006, 03:03 PM

Thanks KMR,

It's allways a pleasure to be able to help somebody.

Sjaak

elmer · #6 (**permalink**) 11-06-2006, 04:46 PM

Hi Sjaak,

Good to see someone offering help with Artlantis, that's really nice from you!
Let see if you can help me on this one:

I'm having problems in trying to slow down an animation when coming to a roundabout, then go back to standard speed exiting the roundabout. I am working with Artl 4.5 on Mac.

Any advice welcome!

Thanks in advance,

Patrice Elmer

Sjaak Boer · #7 (**permalink**) 11-06-2006, 06:50 PM

Elmer,

I had to dig deep because I haven't used 4.5 in almost 2 years. 4.5 came with a fine manual and creating and manipalating a sequence its clearly explained in the manual. The answer to your question is to find in pages 290-296.

If you have no maual available. It is still available for download at the Abvent website, and it's free.: http://www.abvent.com/support/download/index.php

I hope this helps you.

Sjaak

Sjaak Boer · #8 (**permalink**) 11-07-2006, 06:20 AM

Sorry guys for being wrong. I grabbed the wrong manual yesterday. I was holding the manual of 4.0. So I mentioned the wrong pagenumbers. In the manual of 4.5 you need to look at chapter 10, pages 91-98.

Sjaak

elmer · #9 (**permalink**) 11-07-2006, 08:03 AM

Hi Sjaak,

Many thanks for such a prompt answer.
I went through the manual many times and did many trials before posting my thread.....the fact is that I should miss something or may be I am really a nut, but I can't achieve the result I am looking for!
I can do the slow down but not the acceleration back to current speed, it accelerates too slowly and then speeds up too fast!
Is it a matter of setting the ratio image/seconds or where I place the clock?

Thanks in advance if you have any advice,

Regards,

Patrice

pradipta · #10 (**permalink**) 11-07-2006, 08:38 AM

Hi, thanks for all the great links here. i am not an Artlantis user but loving the resouces on the links